Selecting Control Mode - Toshiba VF-S15 Instruction Manual

6.3

Selecting control mode

pt : V/F control mode selection
 Function
The V/F controls shown below can be selected.
 V/F constant
 Variable torque
 Automatic torque boost control *1
 Vector control *1
 Energy saving *1
 Dynamic energy-saving (For fan and pump)
 PM motor control
 V/F 5-point setting
[Parameter setting]
Title

*2: Default setting values vary depending on the setup menu setting. Refer to section 11.5.
*3: 8 is manufacturer setting parameter. Do not change the value of this parameter.
Note:  (V/F control mode selection) is valid only for the first motor.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
*1 Parameter setting macro torque boost:  parameter can automatically set this parameter and
auto-tuning at a time. (Refer to section 6.1.5)
Function
V/F control mode selection
Changes to "V/F constant control" when switching to the second motor, regardless of the  setting.
Adjustment range
0: V/F constant
1: Variable torque
2: Automatic torque boost control
3: Vector control
4: Energy-saving
5: Dynamic energy-saving
(For fan and pump)
6: PM motor control
7: V/F 5-point setting
8: - *3
F-17
E6581611
6
Default setting
*2