6.34.10 Select the panel display at power on
f790 : Panel display selection at power on
f791 : 1st and 2nd characters of
f792 : 3rd and 4th characters of
f793 : 5th and 6th characters of
f794 : 7th and 8th characters of
[Parameter setting]
Select = and set displayed characters with to if it is displayed characters other
than " hello ".
Refer to "ASCII LED " of "Communication Function Instruction Manual : E6581913" about setting characters
and set by hex number.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Function
These parameters allow you to change the characters on panel display at power on.
Default setting is " hello ".
Title
Function
Panel display selection at power on
1st and 2nd characters of
3rd and 4th characters of
5th and 6th characters of
7th and 8th characters of
Adjustment range
0: hello
1: f791 to f794
2, 3: -
0-FFFF
0-FFFF
0-FFFF
0-FFFF
F-133
E6581611
Default setting
0
6
2d2d
2d2d
2d2d
2d2d