Permanent Magnet Motors - Toshiba VF-S15 Instruction Manual

6.38.4 Open network option
c700 to c789 , c800 to c830 : CANopen communication
c001 to c111 , c885 to c896 : Communication option common
c900 to c999
c120 to c148 : CC-Link option parameters
c150 to c164 : PROFIBUS DP option parameters
c200 to c203 : DeviceNet option parameters
c400 to c421 , c850 to c880 : EtherCAT option parameters
c500 to c536 : EtherNet common parameters
c554 to c556 : EtherNet/IP option parameters
c600 to c604 : Modbus TCP option parameters
● CANopen option
 Refer to each Instruction Manual of option for details.

6.39 Permanent magnet motors

f910 : Step-out detection current level
f911 : Step-out detection time
f912 : q-axis inductance
f913 : d-axis inductance
f915 : Factory specific coefficient 9L
 Function
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
CC- Link option
PROFIBUS DP option
DeviceNet option
EtherNet / IP-Modbus TCP option (Type: IPE002Z)
EtherCAT option
If the permanent magnet motor (PM motor) steps out and if the exciting current increases (it increases
in such a case) and remains above the value set with f910 for the period of time set with f911 ,
the inverter will judge the motor to be stepping out and trip it. At that time, the trip message
" sout " is displayed.
parameters
parameters
(Type: CAN001Z, CAN002Z, CAN003Z)
(Type: CCL003Z)
(Type: PDP003Z)
(Type: DEV003Z)
(Type: IPE003Z)
F-143
E6581611
6