Toshiba VF-S15 Instruction Manual page 142

6.6.3
f109 : Analog/logic input selection (VIA/VIB)
 Function
[Parameter setting]
f109
Note) When using VIA terminal as contact input terminals, be sure to insert a resistor between P24 terminal
6
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Changing the functions of VIA and VIB terminals
This parameter allows you to choose between analog signal input and contact signal input for the VIA
and VIB terminals.
Title Function
Analog/logic input
selection
(VIA/VIB)
and VIA terminal in sink logic connection, and insert a resistor between VIA terminal and CC terminal in
source logic connection. (Recommended resistance: 4.7k-1/2W)
When using VIB terminal as contact input terminals, set the upper side of slide switch SW2 to S4 side
and then set f109.
Adjustment range
0: VIA - analog input
VIB - analog input
1: VIA - analog input
VIB - contact input
2: -
3: VIA - contact input (Sink)
VIB - contact input
4: VIA - contact input (Source)
VIB - contact input
F-30
E6581611
Default setting
0