[f307=0: No voltage compensation/output voltage limited]
Input voltage
0
Output frequency
* The above is applied when V/F c ontrol mode selection
parameter is set to "0" or "1".
>1 the output voltage can be prevented
Rated voltage
from exc eeding the input voltage.
[f307=2: No voltage compensation/no output voltage limit]
Input voltage
6
0
Output
frequency
* The above is applied when V/F control mode selection
parameter is set to "" or "".
>1 the output voltage can be prevented
Rated voltage
Note: Rated voltage is fixed at 200V for 240V class and 400V for 500V class.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Input voltage
High
Low
Input voltage
High
Low
from exceeding the input voltage.
[f307=1: Voltage compensation/output voltage limited]
0
Output frequency
[f307=3: Voltage compensation/no output voltage control]
0
* Note that even if the input voltage is set less than
, an output voltage over occurs for a
base frequency of or higher output frequency.
F-72
E6581611
Input voltage
High
Low
Input voltage
High
Low
Output
frequency