11.9 Unchangeable parameters in running
For reasons of safety, the following parameters cannot be changed during inverter running.
Change parameters while inverter stops.
[Basic parameters]
*1 (Command mode selection)
[Extended parameters]
to
to
/ /
,
to
to
,
,
/
to
/
*1: and can be changed during operation by setting =.
Note) Refer to "Communication manual" about parameter Cxxx.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
(Guidance function)
(Application easy setting)
(Automatic acceleration/deceleration)
(Torque boost setting macro function)
*1(Frequency setting mode selection)
(Maximum frequency)
(V/F control mode selection)
(Default setting)
(Checking the region setting)
to
,
to
/ / / /
to
/ / / /
to
,
to
to
K-39
E6581611
11