Additional Information
68
How to Set the GPIB Address
N O TE
The default GPIB address is 20.
To set the GPIB address:
1 Press the Config hardkey.
2 Move to the <GPIB Address> menu option and press Enter. You see a
box displaying the current GPIB address.
Figure 33
Entering a GPIB Address
3 Enter an integer value between 0 and 30 into this box and press
Enter. The address is set to this value.
N O TE
Avoid using 21 as the GPIB address because this number is often the
controller's default GPIB address.
How to Set the Speed of the Serial Interface
N O TE
The default Baudrate of the serial interface is 38400 bps.
To set the Baudrate of the instrument's serial interface:
1 Press the Config hardkey.
Agilent 8163A/B, 8164A/B, and 8166A/B User's Guide, Fourth Edition
Using the System Utilities