Agilent Technologies 8163A User Manual page 2

Notices
This document contains proprietary information that is
protected by copyright. All rights are reserved.
No part of this document may be reproduced in any form
or by any means (including electronic storage and
retrieval or translation into a foreign language) without
prior agreement and written consent from Agilent
Technologies Deutschland GmbH as governed by United
States and international copywright laws.
 Copyright 1999 - 2001 by:
Agilent Technologies Deutschland GmbH
Herrenberger Str. 130
71034 Böblingen
Germany
Subject Matter
The material in this document is subject to change
without notice.
Agilent Technologies makes no warranty of any kind
with regard to this printed material, including, but not
limited to, the implied warranties of merchantability
and fitness for a particular purpose.
Agilent Technologies shall not be liable for errors
contained herein or for incidental or consequential
damages in connection with the furnishing,
performance, or use of this material.
Printing History
New editions are complete revisions of the guide
reflecting alterations in the functionality of the
instrument. Updates are occasionally made to the guide
between editions. The date on the title page changes
when an updated guide is published. To find out the
current revision of the guide, or to purchase an updated
guide, contact your Agilent Technologies representative.
Control Serial Number: First Edition applies directly to
all instruments.
Warranty
This Agilent Technologies instrument product is
warranted against defects in material and workmanship
for a period of one year from date of shipment. During
the warranty period, Agilent will, at its option, either
repair or replace products that prove to be defective.
For warranty service or repair, this product must be
returned to a service facility designated by Agilent.
Buyer shall prepay shipping charges to Agilent and
Agilent shall pay shipping charges to return the product
to Buyer. However, Buyer shall pay all shipping charges,
duties, and taxes for products returned to Agilent from
another country.
Agilent warrants that its software and firmware
designated by Agilent for use with an instrument will
execute its programming instructions when properly
installed on that instrument. Agilent does not warrant
that the operation of the instrument, software, or
firmware will be uninterrupted or error free.
Limitation of Warranty
The foregoing warranty shall not apply to defects
resulting from improper or inadequate maintenance by
Buyer, Buyer-supplied software or interfacing,
unauthorized modification or misuse, operation outside
of the environmental specifications for the product, or
improper site preparation or maintenance.
No other warranty is expressed or implied. Agilent
Technologies specifically disclaims the implied
warranties of Merchantability and Fitness for a
Particular Purpose.
2
Exclusive Remedies
The remedies provided herein are Buyer's sole and
exclusive remedies. Agilent Technologies shall not be
liable for any direct, indirect, special, incidental, or
consequential damages whether based on contract, tort,
or any other legal theory.
Assistance
Product maintenance agreements and other customer
assistance agreements are available for Agilent
Technologies products. For any assistance contact your
nearest Agilent Technologies Sales and Service Office.
Certification
Agilent Technologies Inc. certifies that this product met
its published specifications at the time of shipment from
the factory.
Agilent Technologies further certifies that its calibration
measurements are traceable to the United States
National Institute of Standards and Technology, NIST
(formerly the United States National Bureau of
Standards, NBS) to the extent allowed by the Institutes's
calibration facility, and to the calibration facilities of
other International Standards Organization members.
ISO 9001 Certification
Produced to ISO 9001 international quality system
standard as part of our objective of continually
increasing customer satisfaction through improved
process control.
Fourth Edition:
08164-90B14
Fourth Edition:
08164-90B14: February 2002
Third Edition:
08164-90B13: October 2001
Second Edition:
08164-90B12: September 2001
First Edition:
08164-90B11: August 2001
Agilent 8163A/B, 8164A/B, and 8166A/B User's Guide, Fourth Edition