Agilent Technologies 8163A User Manual page 384

Error Messages
error message
description
error value
action
error message
description
error value
action
error message
description
error value
action
error message
description
error value
action
error message
description
error value
action
384
TCFS Temp. Selftest Failed (error value)
Verifies if the peltier temperature is within target with a given uncertainty
15010 TCFS peltier temperature is not in target range
Please return the unit to your local service center for repair
TCFS Resistor Selftest Failed (error value)
This test measures the R
15021 Photodiode R
15022 Photodiode R
15023 Photodiode R
Please return the unit to your local service center for repair
TCFS Attenuator Selftest Failed (error value)
Verifies whether an attenuator position is repeatable.
15030 Attenuator could not be positioned
Please return the unit to your local service center for repair
Main DC Selftest Failed (error value)
Tests all fixed DC voltages available at the mainboard mux
23011 +15V Measurement DC voltage not in limits
23012 -15V Measurement DC voltage not in limits
23013 +5V Reference DC voltage not in limits
23014 -5V Reference DC voltage not in limits
23015 negative supply voltage of laser current source not in limits
23016 positive pezo supply voltage not in limits
Please return the unit to your local service center for repair
Main Temperature Selftest Failed (error value)
Checks whether the temperature sensors are within given limits
23021 internal temperature sensor above limit
23022 T_FIRE_DIODE is possibly not connected
23023 T_OPTIZ_DIODE is possibly not connected
23024 T_BASEPLATE is possibly not connected
Please return the unit to your local service center for repair
Agilent 8163A/B, 8164A/B, and 8166A/B User's Guide, Fourth Edition
of the photodiodes at channel A, B and M
d
in channel A is below limit
d
in channel B is below limit
d
in channel C is below limit
d
Tunable Laser Sources