Test Record; Test Failure; Instruments Specifications - Agilent Technologies 8163A User Manual

Lightwave multimeter,lightwave measurement system,lightwave multichannel system
Hide thumbs Also See for 8163A:
Table of Contents

Advertisement

Performance Tests

Test Record

Results of the Performance Test may be tabulated in the Test Record
provided after the test procedures. It is recommended that you fill out
the Test Record and refer to it while doing the test. Since the test
limits and set-up information are printed on the Test Record for easy
reference, the record can also be used as an abbreviated test
procedure (if you are familiar with test procedures). The Test Record
can also be used as a permanent record and may be reproduced
without written permission from Agilent Technologies.

Test Failure

If the Agilent 8163A/B Lightwave Multimeter, the Agilent 8164A/B
Lightwave Measurement System, or the Agilent 8166A/B Lightwave
Multichannel System fail any Performance Test, return the instrument
to the nearest Agilent Technologies Sales/Service Office for repair.

Instruments Specifications

Specifications are the characteristics of the instrument that are
certified. These specifications, listed in Appendix C are the limits
against which the Agilent 8163A/B Lightwave Multimeter, the
Agilent 8164A/B Lightwave Measurement System, or the
Agilent 8166A/B Lightwave Multichannel System can be tested.
Appendix C also lists some supplemental characteristics of the
Agilent 8163A/B Lightwave Multimeter, the Agilent 8164A/B
Lightwave Measurement System, and the Agilent 8166A/B Lightwave
Multichannel System and should be considered as additional
information.
Any changes in the specifications due to manufacturing changes,
design, or traceability to the National Institute of Standards and
Technology will be covered in a manual change supplement or revised
manual. The specifications listed here supersede any previously
published.
N O TE
Make sure that all optical connections of the test setups given in the
procedure are dry and clean. DO NOT USE INDEX MATCHING OIL.
For cleaning, use the cleaning instructions given in Appendix E.
340
Agilent 8163A/B, 8164A/B, and 8166A/B User's Guide, Fourth Edition

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

8166a8166b8163b8164a8164b

Table of Contents