Agilent Technologies 8163A User Manual page 256

Applications The PACT Application
N O TE
If you choose <High> or <Medium> as the [Dynamic] parameter and
<Continuous> sweep mode, the graph will update at the end of each
sweep. Figure 167 shows a graph with low dynamic range that is the
result of a single sweep. Figure 168 shows a graph with high dynamic
range that is the result of a three sweeps that were combined using a
"stitching" process.
Figure 167 Low Dynamic Range
256
Agilent 8163A/B, 8164A/B, and 8166A/B User's Guide, Fourth Edition