To Set The Analyzer's Gpib Address - Agilent Technologies 35670A Quick Start Manual

Setting Up

To set the analyzer's GPIB address

1
Press [
Local/GPIB
2
Verify the analyzer's GPIB address at the top of the display.
3
To change the address, press [
You can create an GPIB system by connecting your analyzer to other devices with
GPIB cables. For example, you create a simple GPIB system when you connect the
analyzer to an GPIB plotter. To make the system function properly, you must assign a
unique address to each attached device—even the analyzer.
The analyzer's address is set to 11 at the factory. Valid values include all integers
from 0 through 30.
Current GPIB Address
Settings
14
].
ANALYZER ADDRESS
Agilent 35670A Quick Start Guide
] <number> [ ].
ENTER