Tunable Laser Sources; Initialization Tests - Agilent Technologies 8163A User Manual

Tunable Laser Sources

error message
description
error value
action
error message
description
error value
action
error message
description
error value
action
error message
description
error value
action
error message
description
error value
action
Agilent 8163A/B, 8164A/B, and 8166A/B User's Guide, Fourth Edition
Tunable Laser Sources

Initialization Tests

These tests are executed every time the instrument is powered on,
before the selftests start.
Initialization Error (AttInitialize(), error value)
Error during attenuator initialization. No ready message from attenua-
tor DSP after ...
1 reset
2 init motor
4 find index
8 move to min position
Please return the unit to your local service center for repair
Initialization Error (AttMovePos(zeroPos), error value)
No ready message from attenuator DSP after moving to zero position
taken from caldata
8 (not significant)
Please return the unit to your local service center for repair
Initialization Error (CalData CRC wrong: crc1, stored: crc2!)
The checksum stored in the caldata does not match the calculated
checksum
crc1 calculated checksum
crc2 checksum read from caldata
Please return the unit to your local service center for repair
Initialization Error (Calibration Data Invalid, error value)
The calibration data was tagged as invalid before it was loaded on to
the module
0 not significant
Please return the unit to your local service center for repair
Initialization Error (CalOptZeroMeas, error value)
Error in optical zero measurement
1 not significant
Please return the unit to your local service center for repair
Error Messages
379