Safety
Product
Mechanical
information
information
installation
3.13.1
Real time clock battery replacement
Those keypads which have the real time clock feature contain a battery
to ensure the clock works when the drive is powered down. The battery
has a long life time but if the battery needs to be replaced or removed,
follow the instructions below.
Low battery voltage is indicated by
display.
Figure 3-43 KI-Keypad RTC (rear view)
Figure 3-43 above illustrates the rear view of the KI-Keypad RTC.
1. To remove the battery cover insert a flat head screwdriver into the
slot as shown (1), push and turn anti-clockwise until the battery
cover is released.
2. Replace the battery (the battery type is: CR2032).
3. Reverse point 1 above to replace battery cover.
NOTE
Ensure the battery is disposed of correctly.
Unidrive M702 User Guide
Issue Number: 3
Electrical
Getting
Basic
installation
started
parameters
the motor
low battery symbol on the keypad
Running
NV Media Card
Optimization
Operation
Onboard
Advanced
Technical
Diagnostics
PLC
parameters
data
UL listing
information
49