Emerson Unidrive M702 User Manual page 163

Safety Product Mechanical
information information installation
Parameter
03.160
P2 Calculation Time
03.161
P2 Recovery Time
03.162
P2 Line Delay Time
03.163
P2 Low Speed Update Rate Active
03.164 P2 Encoder Protocol Detected
03.167
P2 User Comms Enable
03.168
P2 User Comms Transmit Register
03.169
P2 User Comms Receive Register
03.171
P2 Error Detected
03.172 P2 Status
RW Read / Write RO Read only
ND No default value NC Not copied
Unidrive M702 User Guide
Issue Number: 3
Electrical Getting Basic
installation started parameters the motor
Range
OL RFC-A
0 to 20 µs
5 to 100 µs
0 to 5000 ns
Off (0) or On (1)
None (0), Hiperface (1), EnDat 2.1 (2),
EnDat 2.2 (3), BiSS (4)
0 to 1
0 to 65535
0 to 65535
Off (0) or On (1)
None (0), AB (1), FD (2), FR (3), EnDat (4), SSI (5),
BiSS (6), EnDat Alt (7), SSI Alt (8), BiSS Alt (9)
Num Number parameter
PT Protected parameter
Running NV Media Card
Optimization
Operation
RFC-S OL
Bit Bit parameter Txt
RA Rating dependent US
Onboard Advanced Technical
PLC parameters data
Default
RFC-A RFC-S
5 µs RW
30 µs RW
RO
RO
RO
0 RW
0 RW
0 RW
RO
RO
Text string Bin Binary parameter
User save PS Power-down save
UL listing
Diagnostics
information
Type
Num
US
Num
US
Num ND NC PT
US
Bit ND NC PT
Txt ND NC PT
Num
US
Num
Num
Bit ND NC PT
Txt ND NC PT
FI Filtered
DE Destination
163