Quick Access Mode; Keypad Shortcuts; Display Modes - Emerson Unidrive M702 User Manual

Safety Product Mechanical
information information installation
Figure 5-2 Display modes
Status
Mode
(Display
not
flashing)
To enter Parameter
Mode, press
Parameter
Mode
(Upper row
display flashing)
To select parameter
Press
To enter Edit Mode,
press
RO
parameter
NOTE
The navigation keys can only be used to move between menus if Pr 00.049 has been set to show 'All Menus'. Refer to section 5.9 Parameter access
level and security on page 93.
5.2.2

Quick access mode

The quick access mode allows direct access to any parameter without
scrolling through menus and parameters.
To enter the quick access mode, press and hold the
on the keypad while in 'parameter mode'.
Figure 5-3 Quick access mode
Unidrive M702 User Guide
Issue Number: 3
Electrical Getting Basic
installation started parameters the motor
Timeout
or
key or
Press
key
R/W
parameter
Edit Mode
(Character to be edited in lower line of display flashing)
Change parameter values using
Enter button
Running NV Media Card
Optimization
Operation
key
To return to Status Mode,
Press
When returning
to Parameter
Mode use the
keys to select
another parameter
to change, if
required
To return to Parameter Mode,
Press key to keep the new parameter value
Press key to ignore the new parameter value and return
the parameter to the pre-edited value
5.2.3

Keypad shortcuts

In 'parameter mode':
• If the up and down
together, then the keypad display will jump to the start of the
parameter menu being viewed, i.e. Pr 05.005 being viewed, when
the above buttons pressed together will jump to Pr 05.000.
• If the left and right
then the keypad display will jump to the last viewed parameter in
Menu 0.
In 'parameter edit mode':
• If the up and down
together, then the parameter value of the parameter being edited will
be set to 0.
• If the left and right
least significant digit (furthest right) will be selected on the keypad
display for editing.
Onboard Advanced Technical
PLC parameters data
Timeout
key
Temporary
Parameter
Mode
(Upper display
flashing)
keys.
keypad buttons are pressed
keypad buttons are pressed together,
keypad buttons are pressed
keypad buttons are pressed together, the
UL listing
Diagnostics
information
Timeout
89