Option Module Identification; Keypad Identification - Emerson Unidrive M702 User Manual

Safety Product Mechanical
information information installation
Unidrive M option modules come in two different formats, a standard option module and a large option module. All standard option modules are color-
coded in order to make identification easy, whereas the larger option module is black. All modules have an identification label on top of the module.
Standard option modules can be installed to any of the available option slots on the drive, whereas the large option modules can only be installed to
option slot 3. The following tables shows the color-code key and gives further details on their function.
Table 2-7 Option module identification (standard modules)
Option
Type
module
Feedback
Fieldbus
Automation
(I/O expansion)
Automation
(Applications)
Table 2-8 Option module identification (large modules)
Option
Type
module
Automation
(Applications)
Table 2-9 Keypad identification
Type Keypad
KI-Keypad
Keypad
KI-Keypad RTC
18
Electrical Getting Basic
installation started parameters
Color Name
15-way D-type
N/A
converter
Single ended
N/A encoder interface
(15V or 24V)
N/A KI-485 Adaptor
Purple SI-PROFIBUS
Medium Grey SI-DeviceNet
Light Grey SI-CANopen
Orange SI-I/O
Moss Green MCi200
Moss Green MCi210
Color Name
SI-Applications Plus
Black
SI-Register
Name
LCD keypad option
Keypad with a LCD display
LCD keypad option
Keypad with a LCD display and real time clock
Running NV Media Card
Optimization
the motor Operation
Drive encoder input converter
Provides screw terminal interface for encoder wiring and spade
terminal for shield
Single ended encoder interface
Provides an interface for single ended ABZ encoder signals,
such as those from hall effect sensors. 15 V and 24 V versions are available
485 Comms Adaptor
485 Comms adaptor provides 485 communication interface. This adaptor
supports 115 k Baud, node addresses between 1 to 16 and 8 1 NP M serial
mode.
Profibus option
PROFIBUS adapter for communications with the drive
DeviceNet option
DeviceNet adapter for communications with the drive
CANopen option
CANopen adapter for communications with the drive
Extended I/O
Increases the I/O capability by adding the following combinations:
• Digital I/O
• Digital Inputs
• Analog Inputs (differential or single ended)
• Analog Output
• Relays
Machine Control Studio Compatible Applications Processor
2nd processor for running pre-defined and/or customer created application
software.
Machine Control Studio Compatible Applications Processor (with
Ethernet communications)
2nd processor for running pre-defined and/or customer created application
software with Ethernet communications.
SyPTPro Compatible Applications Processor (with CTNet)
2nd processor for running pre-defined and/or customer created application
software with CTNet support.
SyPTPro Compatible Applications Processor
2nd processor for running position capture functionality with CTNet support
Further Details
Onboard Advanced Technical
Diagnostics
PLC parameters data
Further Details
Further Details
Unidrive M702 User Guide
UL listing
information
Issue Number: 3