Emerson Unidrive M702 User Manual page 7

Declaration of Conformity (including 2006 Machinery Directive)
Control Techniques Ltd
The Gro
Newtown
Powys
UK
SY16 3BE
This declaration applies to Unidrive M variable speed drive product
range, comprising models numbers composed as shown below:
Maaa-bbcddddd Valid characters:
aaa 600, 700, 701, 702
bb 03, 04, 05, 06, 07
c 2, 4, 5 or 6
00050, 00066, 00080, 00106, 00025,
00031, 00045, 00062, 00078, 00100
00137, 00150, 00172, 00185
00030, 00040, 00069, 00250, 00270, 00300
ddddd
00100, 00150, 00190, 00230, 00290, 00330,
00350, 00420, 00440, 00470
00190, 00240, 00290, 00380, 00440, 00540,
00610, 00660, 00750, 00770, 00830, 01000
This declaration relates to these products when used as a safety
component of a machine. Only the SAFE TORQUE OFF function
may be used for a safety function of a machine. None of the other
functions of the drive may be used to carry out a safety function.
These products fulfil all the relevant provisions of Directives 2006/42/EC
(The Machinery Directive) and 2004/108/EC (The EMC Directive)..
EC type-examination has been carried out by the following notified body:
TÜV Rheinland Industrie Service GmbH
Am Grauen Stein
D-51105 K ln
Ö
Notified Body identification number:
EC type-examination certificate number: 01/205/5270/12
The harmonized standards used are shown below:
Adjustable speed electrical power drive
EN 61800-5-1:2007 systems. Safety requirements. Electrical,
thermal and energy
Adjustable speed electrical power drive
EN 61800-5-2:2007
systems. Safety requirements. Functional
Safety of machinery. Safety-related parts of
EN ISO 13849-1:2008 control systems. General principles for
design
Safety of machinery. Safety-related parts of
EN ISO 13849-2:2008
control systems. Validation
Adjustable speed electrical power drive
EN 61800-3:2004 systems. EMC requirements and specific test
methods
Safety of machinery. Functional safety of
EN 62061:2005 safety related electrical, electronic and
programmable electronic control systems
Unidrive M702 User Guide
Issue Number: 3
0035
Person authorized to compile the technical file:
C Hargis
Chief Engineer
Address as above
T. Alexander
Vice President, Technology
Newtown
Date: 7th May 2013
IMPORTANT NOTICE
These drive products are intended to be used with appropriate
motors, sensors, electrical protection components and other
equipment to form complete systems. It is the responsibility of the
installer to ensure that the design of the complete machine,
including its safety-related control system, is carried out in
accordance with the requirements of the Machinery Directive and
any other relevant legislation. The use of a safety-related drive in
itself does not ensure the safety of the machine.
Compliance with safety and EMC regulations depends upon
installing and configuring inverters correctly. The inverters must be
installed only by professional assemblers who are familiar with
requirements for safety and EMC. The assembler is responsible for
ensuring that the end product or system complies with all the
relevant laws in the country where it is to be used. Refer to the
Installation Guide.
7