Emerson Unidrive M702 User Manual page 71

Safety Product Mechanical
information information installation
Figure 4-24 Removal of the size 4 internal EMC filter
To electrically disconnect the Internal EMC filter, remove the screw as
highlighted above (1).
Figure 4-25 Removal of the size 5 internal EMC filter
3
Remove the three M5 terminal nuts (1). Lift away the cover (2) to expose
the M4 Torx internal EMC filter removal screw. Finally remove the M4
Torx internal EMC filter removal screw (3) to electrically disconnect the
internal EMC filter.
Figure 4-26 Removal of the size 6 internal EMC filter
1
To electrically disconnect the Internal EMC filter, remove the screw as
highlighted above (1).
Unidrive M702 User Guide
Issue Number: 3
Electrical Getting Basic
installation started parameters the motor
2
1
Running NV Media Card
Optimization
Operation
Figure 4-27 Removal of the size 7 and 8 internal EMC filter (size 7
shown)
To electrically disconnect the Internal EMC filter, remove the screw as
highlighted above (1).
Onboard Advanced Technical
Diagnostics
PLC parameters data
UL listing
information
1
71