How To Select An Arcs Chart By Its Number - Furuno FEA-2807 Operator's Manual

9. Raster Chart Material
Searching for an ARCS chart around your ship
You can use either true motion or relative motion. In the true motion mode, your ship moves until it reaches the true
motion reset borderline, where it jumps back to an opposite position on the screen based on ship's course. In the
relative motion mode, your ship stays in a fixed position, while the chart moves on screen.
If, in the true motion mode, you reset own position with TM Reset, your ship will immediately jump to the true
motion reset position.
If, in the true motion mode, you use ShipOffcenter, your ship will go to that position on screen and continue true
motion movement from that position. When it reaches the true motion reset borderline, it will automatically jump to
the true motion reset position.
If, in the relative motion mode, you reset own position with TM Reset, your ship will immediately jump to the true
motion reset position and use that position as fixed position to stay on screen.
If you use relative motion, you can select a new fixed position for your ship by using ShipOffcenter.
Use Range - ¨and Range+ to select desired chart scale.
9.14.4

How to select an ARCS chart by its number

How to open an ARCS chart manually
To show a specific ARCS format raster chart, use the "Open Chart" function as follows:
9-32
1. Open the Chart menu.
2. See if the text "Activate S57 chart" appears on the first line of the menu. If it
is displayed, then go to step 4.
3. If the text "Activate ARCS Chart" is shown, push the scrollwheel.
4. Select Open Chart from the menu and Manual from sub menu.
5. Select desired chart from the chart list dialog then click the Open Chart
button.
The selected chart is automatically displayed in the electronic chart area.