Radar Overlay Related Alerts - Furuno FEA-2807 Operator's Manual
Electronic chart display and information system (ecdis)
Hide thumbs
Also See for FEA-2807:
- Specifications (4 pages) ,
- Operator's manual (704 pages) ,
- Installation manual (168 pages)
Table of Contents
Advertisement
Alert number 519:
------------------------------------
TRACK CONTROL SYSTEM IS UNABLE TO GET
VESSEL TO APPROACH THE TRACK. ALERT IS
TRIGGERED IF VESSEL IS OUTSIDE
CHANNEL LIMIT AND IF CROSS TRACK
ERROR IS STILL INCREASING.
30.12.7 Radar overlay related alerts
Alert number 100:
------------------------------------
NO HEADLINE AVAILABLE FOR RADAR
OVERLAY.
CABLING FOR RADAR OVERLAY
Alert number 101:
------------------------------------
NO AZIMUTH
OVERLAY.
CABLING FOR RADAR OVERLAY
Alert number 102:
------------------------------------
NO TRIGGER AVAILABLE FOR RADAR
OVERLAY.
CABLING FOR RADAR OVERLAY
Alert number 103:
------------------------------------
NO VIDEO AVAILABLE FOR RADAR
OVERLAY.
ON RADAR OVERLAY.
AND CABLING FOR RADAR OVERLAY
Alert number 104:
------------------------------------
NO HEADING REFERENCE AVAILABLE FOR
RADAR PROCESSOR WHICH IS SOURCE FOR
RADAR OVERLAY. CHECK RADAR PROCESSOR
Alert number 105:
------------------------------------
RADAR OVERLAY HARDWARE FAILURE.
SWITCH POWER ON/OFF.
ECDIS SW.
Alert number 106:
------------------------------------
INDICATION WHILE LAN CONNECTION FOR
RADAR FAILS BETWEEN ECDIS PROCESSOR
AND RADAR PROCESSOR.
CHECK LAN CONNECTORS AND CABLES
POWER ON/OFF AND REINSTALL ECDIS SW.
TRACKPILOT: XTE COMP. LIM
RADOV NO HEADLINE
CHECK CONNECTORS AND
RADOV NO AZIMUTH
AVAILABLE FOR RADAR
CHECK CONNECTORS AND
RADOV NO TRIGGER
CHECK CONNECTORS AND
RADOV NO VIDEO
CHECK ADJUSTMENT OF GAIN ON
CHECK CONNECTORS
RADOV NO GYRO
RADOV HW FAILURE
REINSTALL
LAN RADAR CONNECT FAILURE 6/13
/5/12
6/13
6/13
6/13
6/13
6/13
6/13
30. Alerts
30-39
Advertisement
Table of Contents
Troubleshooting
