How To Display Name Or Call Sign Of Ais Target; Priority Selection Between Tt And Ais - Furuno FEA-2807 Operator's Manual

21. AIS Target Functions

21.13 How to Display Name or Call Sign of AIS Target

You can display either the name or call sign of AIS targets on the ECDIS display. Put the cursor in the upper left
corner of the Target Dialog window then select No Label, Display Name or Display Call Sign as desired. See the
figure below for how the data display changes when changing from call signs to names and vice versa.
Display Name
Display Call Sign

21.14 Priority Selection Between TT and AIS

You can select whether TT or AIS has priority to display target data. This is useful when you have both TT and AIS
symbols for the same target.
1. Put the cursor on the location shown below.
06.xx 06.xx 06.xx 06.xx
2. Use the left button to get "<" sign to select AIS symbol for priority for AIS target, push left button once more to
get ">" sign to select priority for TT symbol target.
21-12