8.12
Symbology Used in Vector Charts
You can familiarize yourself with the symbology used by browsing IHO ECDIS Chart 1, which is included in this
ECDIS. See section 8.9.4 "How to control visible chart features".
1. Open the Chart menu.
2. Select ECDIS Chart 1 from the menu then push the scrollwheel.
3. Select desired chart symbols from the submenu to show on the ECDIS.
Appendix 2 contains examples of plots with symbols.
The Return dialog window appears when you select something from the submenu of ECDIS Chart 1. When you
close the Return dialog window, by clicking the X at the upper right corner, ECDIS Chart 1 will be closed and
normal chart presentation is displayed.
8.12.1
How to change presentation library used for vector chart
features
The ECDIS uses the official IHO presentation library to draw vector charts. The presentation library is replaceable,
but this feature is only intended to be used by qualified service personnel and type approval authorities.
When this manual was published, the official presentation library was "AML003_4.dai", based on "Official IHO
presentation library for ECDIS S-57 Edition. 3.1.1 and S-52 Edition 3.4".
An example of Overview chart
8. Vector Chart Material
8-85