Furuno FEA-2807 Operator's Manual page 84

Electronic chart display and information system (ecdis)
Hide thumbs Also See for FEA-2807:
Table of Contents

Advertisement

8. Vector Chart Material
Conversion errors, but the chart is partly usable as NON ENC
Use cell status to check details of errors. The chart is no longer ENC if it was produced by a Hydrographic Office.
You must refer to a paper chart as legal primary aid of navigation, when you navigate in the area covered by this
chart.
Successful auto. conv with errors: ENC: n1302322.000, edt:
Failed conversion
Chart is not usable and you cannot view the chart. You must refer to a paper chart as legal primary aid of navigation,
when you navigate in the area covered by this chart.
Failed automatic conversion: ENCD-ROMK3EI0XE.000, edt:
Failed conversion of an update
Chart is partly usable, but it is not up-to-date. Get the latest edition of the chart from its publisher. The chart is still
ENC, but it no longer fulfils the SOLAS requirement. You must refer to a paper chart as legal primary aid of
navigation, when you navigate in the area covered by this chart.
Failed auto. conv: ENC: GB500005.001, edt:
new edition of Base cell
Failed conversion. Checksum is not correct
Chart is not usable and you cannot view it. Try to reload the Base cell or update from the original media. If that
doesn't work order a new CD-ROM from your chart supplier. You must refer to a paper chart as legal primary aid of
navigation, when you navigate in the area covered by this chart.
Failed automatic conversion: ENC: SG5CONTL.000, edt:
Failed conversion. Checksum of an update is not correct
Chart is partly usable, but it is not up-to-date. Try to reload the update from the original media. If that doesn't work
order a new CD-ROM from your chart supplier. Note that the chart is still ENC, but it no longer fulfils the SOLAS
requirement. You must refer to a paper chart as legal primary aid of navigation, when you navigate in the area
covered by this chart.
Failed automatic conversion: ENC: GB5X01SW.002, edt:
Failed conversion. At least one of the previous updates has failed in its SENC conversion
The system cannot accept additional updates unless all previous updates have been successfully converted to SENC.
Chart is partly usable, but it is not up-to-date. Try to reload the failed previous update from the original media (in
this example the failed previous update is GB5X01SW.002). If that doesn't work, order a new CD-ROM from your
chart supplier. The chart is still ENC, but it no longer fulfils the SOLAS requirement. You must refer to a paper
chart as legal primary aid of navigation, when you navigate in the area covered by this chart.
Failed automatic conversion: ENC: GB5X01SW.003, edt:
MISSING
Failed conversion. The Base cell has failed in its SENC conversion
The system cannot accept updates unless the Base cell has been successfully converted to SENC. Chart is not usable
and you cannot view it. Try to reload the Base cell from the original media (in this example the failed Base cell is
GB5X01SW.000). If that doesn't work, order a new CD-ROM from your chart supplier. You must refer to a paper
chart as legal primary aid of navigation, when you navigate in the area covered by this chart.
Failed automatic conversion: ENC: GB5X01SW.001, edt:
OR Update MISSING
Note: Always read both the "Failed SENC conversion" dialog and "Conversion history log" very carefully, because
they contain important information about the legal status of the charts. Specially note that a chart may lose its legal
status to fulfil SOLAS requirements and you may need to refer to a paper chart as legal primary aid of navigation.
8-22
1, upd:
1, upd:
0 / 1999 2 17
2, upd:
1 / 1997 9 26 Updating impossible before
1, upd:
0 / 1996 2 25 CHECKSUM ERROR
1, upd:
2 / 2005 1 1 CHECKSUM ERROR
1, upd:
3 / 2005 9 8 PREVIOUS Update
1, upd:
1 / 1998 9 8 PREVIOUS Base CELL
0 / 1999 1 4 NON ENC

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fea-2107-bbFea-2107

Table of Contents