How To Remove S57 Chart Cells From The System - Furuno FEA-2807 Operator's Manual

Electronic chart display and information system (ecdis)

Hide thumbs Also See for FEA-2807:

Table of Contents

How to remove S57 chart cells from the system

How to remove specific chart cells from the system

To remove an S57 format vector chart cell from the system, do the following:

1. Select Remove Charts from the Chart menu.

2. Select chart cells to remove from the system. You can remove Base cell (000), updates (001...) and SENC

format (snc).

3. Press the Remove Chart button. The window shown below appears.

4. Confirm removal by clicking the OK button. The system will remove file(s) from the hard disk.

8. Vector Chart Material

Fea-2107-bb Fea-2107