How To Select A Display; Graphic Displays - Furuno NAVpilot 711C Operator's Manual

1. OPERATIONAL OVERVIEW
1.5

How to Select a Display

There are three displays to select from each steering mode.
To select a display, do the following operation according to the steering mode.
• STBY mode: Press the
• AUTO and WIND mode: Press the AUTO key.
• NAV mode: Press the NAV key.
Graphic
or
Numerical display
Analog indicator
: Page no. appears when selecting display.
Note: Page layout of the page 3 depends on setting of [Data Box Format].
1.5.1

Graphic displays

There are five types of the graphic displays: compass, highway, wind, rudder, engine
speed display.
Compass display
The compass display show ship's heading data. The compass rotates to keep the
ship's heading (gray pointer) at the top of the display. Requires heading data.
1-4
key
Graphic
or
Numerical display
Analog
Data box
indicator
SETCSE SETCSE
Graphic
Numerical display
Data box
Ship's heading
(Gray pointer)
Set course / waypoint cource
(Red pointer)
Steering mode data
(See page 1-6.)
or
Data box