How To Add An Arcs Chart To A Group - Furuno FEA-2807 Operator's Manual

9. Raster Chart Material
9.12.2

How to add an ARCS chart to a group

After you have entered a name for the group, click the Add Frame button in the Group field. Select the area to
group by moving the cursor to the desired location and clicking the left mouse button. Below is a sample group.
Charts that are inside the frame or intersect a frame limit are added to the group. When you have made your frame,
click the Done button in the Group field. Chart cells that are selected into the defined group are displayed in the
Inside list box in the Group window.
You can also add charts to your group by using the << (add) button. To add a chart, select the chart ID from the
Outside list box then click the << button.
Note: Check the Permit box to have the system display only the chart cells for which you have permits.
After you have selected some charts to group, click the Save button to save the selected charts as a group.
9-26