How To Change Co-Ordinate Polarity; How To Delete A Character - Furuno FEA-2807 Operator's Manual

4.5.3

How to change co-ordinate polarity

By clicking co-ordinate polarity
1. Put the cursor before the co-ordinate (N, S, E, W) then push the left mouse button.
2. Spin the scrollwheel to select desired polarity then push the scrollwheel.
By choosing polarity from drop-down menu
1. Put the cursor inside the input window.
2. Click the right mouse button to show the following window.
3. Select Characters and push the left mouse button. Your window should now look something like the one below.
("N" and "S" shown for latitude.)
4. Spin the scrollwheel to select appropriate polarity then push the scrollwheel. The coordinate is changed and
then the window is closed.
4.5.4

How to delete a character

A character can be deleted from text/numeric input field as follows:
1. Put the cursor to the right of the digit you want to delete then push the right mouse button.
2. Delete is selected – push the scrollwheel to delete the alphanumeric selected. The character is deleted and the
window is closed.
4. Control Units
4-5