How To Edit Position Of Orange Symbols - Furuno FEA-2807 Operator's Manual

10.5.4

How to edit position of orange symbols

An object can be a point, line or area.
• Point has only one point in its presentation.
• Line can consist of one or more chains. A chain consists of two or more points.
• Area consists of a line that is closed.
3.
7.
5.
Set the positions
with cursor and
push left mouse
button.
Click Accept button.
1. Follow steps 1-3 at the top of page 10-6 to display the Manual Update Planning dialog box.
2. Click the Modify button, click the object on the chart that you want to edit then click the Accept button.
3. Click the Edit Properties button. The Object window appears.
4. Click the Edit Position button.
5. Put the cursor on the desired location on the ECDIS display, push left button then click the Accept button.
Repeat this until you have defined all points. See the next two pages for how to modify a chart object.
6. Click the Accept button on the Master/Slaves window.
7. Click the Accept Manual Updates as Permanent button.
10. Manual Updates
4.
6.
10-9