9.10.1
How to load updates by active group
Loading updates by active group is used when you want to update only ARCS charts that you have designed to
include in a defined group. This is very useful if your license includes a lot of charts from around the world and you
are going to use only a part of charts for which you have a permit. Define a group from charts you need for voyage
and update them into the system. To update by active group, do as follows:
[Load Charts]
Go Back
By Permits
By Group
Manual
1. Define a group, if one does not exist. See section 9.12 "How to Group ARCS
Charts".
2. Set group as an Active group. See "How to select an active group" on page 9-
28.
3. Open the Chart menu, select Update Charts from the menu and By Group
from the sub menu.
4. An ARCS Update window appears and it shows active group.
5. Insert Update CD-ROM in the CD-ROM drive then click the Load button.
9. Raster Chart Material
9-21