How To Load An Renc-Generated Permit Cd-Rom, Floppy Disk Or Usb Memory - Furuno FEA-2807 Operator's Manual

8. Vector Chart Material
8.7.6 How to load an RENC-generated permit CD-ROM, floppy disk
or USB memory
An RENC can deliver permits in a CD-ROM, floppy disk or USB memory. When you receive new permits from an
RENC, you have to load them into the ECDIS. A permit is a key that is used to decrypt the chart you want to use in
the ECDIS. To load permits, do the following:
1. Select Chart Permits from the Chart menu.
2. Click the Load File button.
3. Select CD-ROM from the Look-in box.
Permits are available in two formats.
•
PERMIT.TXT that contain permits and their editions and subscription types. This is the preferred format.
•
*.PMT, received from an RENC, contain permits, but no edition or subscription information. Note that the
*.PMT format is used by the system for backup of permits. As a backup it contain also subscription type
and edition.
•
Select suitable permit file and click the Load button to load permits.
4. The Chart Permits window displays permits that are loaded into the ECDIS. Check that all permit cells are
shown in the List box.
Messages that may appear when loading a permit
If you try to load a permit file that
does not have any permit, you get the
following message. Please contact
RENC service to get new permit file.
8-58