How To Load, Remove Chart Permits For Arcs Navigator License - Furuno FEA-2807 Operator's Manual

9. Raster Chart Material
9.6 How to Load, Remove Chart Permits for ARCS
Navigator License
Permits are usually delivered in a floppy disk. Load the ARCS navigator license permits as follows:
Select Next Chart
1. Copy ARCS permit from floppy disk to USB memory. Then, do the following:
2. Open the Chart menu then select Chart Permits from the menu.
3. Select Navigator license as the type of license. Insert a permit floppy disk in the floppy disk drive, or connect
permit USB memory. Click the Load File button.
4. Select Gb.ncp then click the Open button.
5. Check in the Permit Management window that permits are displayed here with correct information. Close the
window by clicking the X at the upper right side of the window.
Enter Manual button: This function enables manual entry of a permit string that is delivered, for example, by telex.
After typing the string, the operator can accept it by clicking the Add button or reject it by clicking the X at the
upper right side of the window.
Backup button: This button opens the "Save As" window, where the operator may make a backup copy from a chart
permit file.
9-14
Permit Load