How To Set Conditions For Logging; How To Reset Voyage Log For Next Voyage - Furuno FEA-2807 Operator's Manual

24. Recording Functions
24.4.2

How to set conditions for logging

The operator can define limits for course change and speed change of your ship to be recorded and also time period
for automatic logging. To set them, do the following:
24.4.3

How to reset voyage log for next voyage

The voyage log can be emptied. See section 24.3.7 "Resetting (emptying) voyage and danger target logs". A backup
copy of the voyage log can be made. See section 24.8 "How to Make Backup Copy from ".
24-4
1. Spin the scrollwheel to show Menu/Info/Chart Menu in the mouse functions
area then push the left mouse button.
2. Select Record from the menu then push the scrollwheel.
3. Select Settings from the menu then push the scrollwheel.
4. If the Voyage page is not already open, click the Voyage tab to open it.
5. Set desired limits for speed and course and also logging interval, using the
scrollwheel. When the speed or course changes by the amount set here, a
log entry is made.
6. Select alerts (alert numbers) to record, in the Alerts window. For alert
numbers and their meanings, see Chapter 30 "Alerts".