How To Load Chart Permits For Arcs Skipper License - Furuno FEA-2807 Operator's Manual

9.7 How to Load Chart Permits for ARCS Skipper
License
Permits are usually delivered in a floppy disk. Copy permit file into a USB memory then load ARCS Skipper chart
permits into the system as follows:
1. Open the Chart menu then select Chart Permits from the menu.
2. Select Skipper license as the type of license. Insert a permit floppy disk in the floppy disk drive, or connect
permit USB memory. Click the Load File button.
3. Select gb.ncp then click the Open button.
4. Check in the Permit Management window that permits are displayed there with correct information. Close the
window by pressing the CANCEL key on the Control Unit RCU-018 or clicking the X on the window.
Note: If you are holding more than one ARCS Skipper packs onboard, only one pack can be loaded into the ECDIS
at a time. If you load a new ARCS Skipper permit into the ECDIS, you must load charts and weekly updates from
CD-ROMs delivered with and listed in your License Agreement (also known as "Schedule A").
Permit Load
E:
9. Raster Chart Material
9-15