How To Confirm Checked Conditions Of The Route Plan - Furuno FEA-2807 Operator's Manual

6. Setup Before Departure
6.3.3

How to confirm checked conditions of the route plan

You can check on the Alerts
page if checked conditions are
used with the route in route
monitoring.
If the text "Current selection
differs" is displayed, use Initial
Settings>Chart alert parameters
to make "Chart alerts"
selections. Safety contours may
be changed with the "Safety
contour" field in the Display
Settings. Select used condition
during monitoring the same as
planned. Differences between
used and planned conditions are
displayed with asterisks (*).
6-4