3. ECDIS Display
3.4
How to Control Planning and Monitoring Modes
A route, a user chart or Notes can be selected from the information area, in either the planning mode or the
monitoring mode.
To select desired mode, put the cursor on the text Route, User Chart or Notes in the information area and click. A
drop-down dialog box appears, where you can select either Monitor or Plan by clicking the appropriate button with
the left mouse button. With User Chart or Notes, only the planning mode or the monitoring mode can be displayed
in the status bar. (Display can be activated with a radio button. See the figure below.)
3-12
Select Route
(WT)
Monitor
A
Plan
B
Select Notes
Monitor
Notes1
Plan
Notes2
User Chart
Monitor
A1
Plan
B1
X
X
DISP
DISP
X
DISP
DISP