Furuno FEA-2807 Operator's Manual page 443

Alert number 706:
------------------------------------
GYRO1 DATA IS NOT RECEIVED CORRECTLY
USE 'INITIAL SETTINGS' MENU TO SET
GYRO AGAIN. IF FAILURE STILL
EXISTS, USE 'SENSORS' SPEED/POSITION
PAGE TO SELECT VALID SENSORS.
Alert number 707:
------------------------------------
GYRO2 DATA IS NOT RECEIVED CORRECTLY
USE 'SENSORS' SPEED/POSITION PAGE TO
SELECT VALID SENSORS.
Alert number 708:
-----------------------------------
LOG DATA IS NOT RECEIVED CORRECTLY.
USE 'SENSORS' SPEED/COURSE
TO SELECT VALID SENSORS
Alert number 708:
------------------------------------
DUAL AXIS LOG DATA IS NOT RECEIVED
CORRECTLY. USE SPEED/COURSE PAGE
TO SELECT VALID SPEED SENSORS.
Alert number 709:
------------------------------------
DUAL AXIS LOG DATA IS NOT RECEIVED
CORRECTLY. USE SPEED/COURSE PAGE
TO SELECT VALID SPEED SENSORS.
Alert number 710:
------------------------------------
ECHO SOUNDER DATA IS NOT RECEIVED
CORRECTLY.
VERIFY ECHO SOUNDER OPERATION.
Alert number 711:
------------------------------------
WIND SENSOR DATA IS NOT RE CEIVED
CORRECTLY.
VERIFY WIND SENSOR OPERATION.
Alert number 712:
------------------------------------
POSITION EQUIPMENT 1 DATA IS NOT
RECEIVED CORRECTLY. USE 'SENSORS'
POSITION TO SELECT VALID POS SENSOR.
Alert number 713:
------------------------------------
POSITION EQUIPMENT 2 DATA IS NOT
RECEIVED CORRECTLY. USE 'SENSORS'
POSITION TO SELECT VALID POS SENSOR.
GYRO ERROR
GYRO ERROR
LOG ERROR
DUAL AXIS LOG (WT) ERROR
DUAL AXIS LOG (BT) ERROR
ECHO SOUNDER ERROR
WIND SENSOR ERROR
POSITION EQUIPMENT ERROR
POSITION EQUIPMENT ERROR
/5/12
/5/12
/5/12
/5/12
/5/12
/6/13
/6/13
/5/12
/5/12
30. Alerts
30-13