Line Page - Furuno FEA-2807 Operator's Manual

15.7.3

Line page

The Line page lets you
inscribe lines on a user chart.
To select this page, push the
right mouse button (Next
Card), click the tab with the
left mouse button or hit the
NEXT key on the keyboard-
equipped control unit.
Line box: Show the current and total number of line points.
Name: Name current line.
Element type: User can select appropriate line type from combo box. Available types are:
•
•
•
•
•
•
Navigation and route lines may also be displayed on the radar screen. Depth contours, coast
lines NMT lines and NLT lines are displayed only on the ECDIS screen.
Danger Line: Check to use line in chart alert calculation.
Start position: Manually enter starting latitude and longitude in this box.
Manually enter ending latitude and longitude of line in this box.
End position:
Check to draw a new line. If unchecked, any newly entered line point will be connected to
New start position:
previous line.
Add: Add new record next to current record. User can either edit position by entering new co-
ordinates or by showing new location with the trackball and left mouse button.
Select a user chart from which to import lines.
Import:
Delete: Delete current record of line.
Enable changes: Check in order to modify user chart.
Note: The user chart may only be modified in the Course-up or North-up mode.
Navigation line
Route line
Depth contour
Coast line
NMT line, known as clearing line - not more than
NLT line, known as clearing line - not less than
15. User Chart Control
15-11