Flush Mounting A Series Side By Side - Furuno MU-192HD Operator's Manual

1.6

Flush Mounting a Series Side by Side

You can flush mount two display units side by side.
1. Make a cutout in the mounting location as shown below.
2. Follow step 2 to step 5 in section 1.2 to set the two display units in the mounting location.
Note: Attach the attachment 19 to the top, bottom, left, and right as shown in the figure below.
3. Attach the flush mount fixtures with the washer head screws to join the two display units.
4. Fasten the two display units tightly. See step 7 to step 10 in section 1.2.
4-ø18(0.71")*
9 (0.35")
*: The drill bit with a diameter of 18 mm or less can be used.
Join the display units with the flush mount fixtures.
892r1 (35.12")
16
1. MOUNTING, WIRING
Attachment 19
Flush Mount Fixture
(4 pcs.)