How To Store And Recall Chart Display Settings For Visible Chart And Navigational Features - Furuno FEA-2807 Operator's Manual

8.9.7 How to store and recall chart display settings for visible chart
and navigational features
Chart display settings and symbol display settings use common settings, which means that when you select settings
display settings the same file is selected for symbol settings.
You can define chart display and symbol display settings that are displayed over S57 charts cells. You can save
these chart display settings to your hard disk and recall them whenever you need them.
How to create new chart display settings
To create new settings for chart display, do the following:
1. Display Chart Display/Info/Standard Display in the mouse functions area then push the left mouse button.
Symbol Display
2. Put the cursor on the small triangle on the Chart Display or symbol dialog box.
3. Select "Save As" from the Chart Display or Symbol Display menu then push the scrollwheel.
4. Enter desired name and click the OK button in the dialog box.
5. Make your changes to both Chart Display and Symbol display settings. Note that you have to select "Save"
from the menu before closing the dialog box. When you save new chart display settings, all titles previously
saved (Symbol Display, Chart Display) are saved under the name selected here.
How to select chart display settings
1. Open the Chart Display or symbol Display dialog box and put the cursor on the triangle.
2. Choose "Select" from the menu and push the scrollwheel.
3. Select desired chart display settings from the list box.
How to save changes to chart display settings
1. Open the Chart Display or Symbol Display dialog box and put the cursor on the triangle.
2. Select Save from the menu to save current chart display settings.
8. Vector Chart Material
8-75