Maintaining Rrpp - Huawei Quidway S6700 series Configuration Manual

Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability
Run the display rrpp brief command, and you can view information such as the node mode,
RRPP status, control VLAN, protected VLAN, and values of timers. The following is an
example:
<Quidway> display rrpp brief
Abbreviations for Switch Node Mode :
M - Master , T - Transit , E - Edge , A - Assistant-Edge
RRPP Protocol Status: Disable
RRPP Working Mode: HW
RRPP Linkup Delay Timer: 1 sec (0 sec default).
Number of RRPP Domains: 1
Domain Index
Control VLAN
Protected VLAN : Reference Instance 10
Hello Timer
Ring
ID
-------------------------------------------------------------------------------
1
Run the display rrpp verbose command, and you can view detailed information such as the
control VLAN, protected VLAN, timers, node mode, and port status. The following is an
example:
<Quidway> display rrpp verbose domain 1 ring 1
Domain Index
Control VLAN
Protected VLAN : Reference Instance 30
Hello Timer
RRPP Ring
Ring Level
Node Mode
Ring State
Is Enabled
Primary port
Secondary port : XGigabitEthernet0/0/2
Run the display rrpp statistics command, and you can view the statistics of sent and received
packets. The following is an example:
<Quidway> display rrpp statistics domain 1 ring 1
RRPP Ring
Ring Level
Node Mode
Is Active
Primary port
Packet
Direct
-------------------------------------------------------------------------------
Send
Rcv
Secondary port: XGigabitEthernet0/0/2
Packet
Direct
-------------------------------------------------------------------------------
Send
Rcv

3.5 Maintaining RRPP

Commands of clearing statistics helps to locate the RRPP faults on a device.
Issue 01 (2011-07-15)
: 1
: major 30
: 1 sec(default is 1 sec)
Ring Node Primary/Common
Level Mode Port
0 M XGigabitEthernet0/0/1
: 1
: major 400
: 1 sec(default is 1 sec)
: 1
: 0
: Master
: Complete
: Enable
: XGigabitEthernet0/0/1
: 1
: 0
: Master
: Yes
: XGigabitEthernet0/0/1
LINK
HEALTH DOWN
2934 0
0 1
LINK
HEALTH DOWN
0 0 1
2928 1 0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
sub 31
Fail Timer : 6 sec(default is 6 sec)
sub 401
Fail Timer : 6 sec(default is 6 sec)
Is Active : Yes
Port status: UP
Port status: BLOCKED
COMMON COMPLETE EDGE
FDB FDB HELLO
1 1 0
0 0 0
COMMON COMPLETE EDGE
FDB FDB HELLO
0 0
0 0
3 RRPP Configuration
Secondary/Edge
Port
XGigabitEthernet0/0/2
MAJOR Packet
FAULT Total
0 2936
0 1
MAJOR Packet
FAULT Total
0 1
0 2929
Is
Enabled
No
72