Huawei Quidway S6700 series Configuration Manual page 145

Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability
[UPEF-mst-region] active region-configuration
[UPEF-mst-region] quit
l Configure UPE G.
# Create data VLANs 100 to 300 on UPE G.
<Quidway> system-view
[Quidway] sysname UPEG
[UPEG] vlan batch 100 to 300
# Create instance 1 and map it to control VLANs VLAN 20 and VLAN 21 and data VLANs 100
to 300 in domain 3.
[UPEG] stp region-configuration
[UPEG-mst-region] instance 1 vlan 20 21 100 to 300
# Activate the configuration.
[UPEG-mst-region] active region-configuration
[UPEG-mst-region] quit
l Verify the configuration.
Run the display stp region-configuration command on the devices to view the mapping
between instances and VLANs. The displayed information on UPE A is as follows:
[UPEA] display stp region-configuration
Oper configuration
Instance
Step 2 Configure RRPP interfaces.
l Configure UPE A.
# Disable STP on the interfaces that need to be added to the RRPP ring on UPE A. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPEA] interface xgigabitethernet 0/0/1
[UPEA-XGigabitEthernet0/0/1] port link-type trunk
[UPEA-XGigabitEthernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPEA-XGigabitEthernet0/0/1] stp disable
[UPEA-XGigabitEthernet0/0/1] quit
[UPEA] interface xgigabitethernet 0/0/2
[UPEA-XGigabitEthernet0/0/2] port link-type trunk
[UPEA-XGigabitEthernet0/0/2] port trunk allow-pass vlan 100 to 300
[UPEA-XGigabitEthernet0/0/2] stp disable
[UPEA-XGigabitEthernet0/0/2] quit
l # Configure UPE B.
# Disable STP on the interfaces that need to be added to the RRPP ring on UPE B. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPEB] interface xgigabitethernet 0/0/1
[UPEB-XGigabitEthernet0/0/1] port link-type trunk
[UPEB-XGigabitEthernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPEB-XGigabitEthernet0/0/1] stp disable
[UPEB-XGigabitEthernet0/0/1] quit
[UPEB] interface xgigabitethernet 0/0/2
[UPEB-XGigabitEthernet0/0/2] port link-type trunk
[UPEB-XGigabitEthernet0/0/2] port trunk allow-pass vlan 100 to 300
Issue 01 (2011-07-15)
Format selector :0
Region name :00e0cd568d00
Revision level :0
Vlans Mapped
0 1 to 4, 7 to 9, 12 to 99, 301 to 4094
1 5 to 6, 100 to 200
2 10 to 11, 201 to 300
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
135