Huawei Quidway S6700 series Configuration Manual page 104

Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability
l Run the display rrpp verbose domain command on Switch C to view the domain
----End
Configuration Files
l
Issue 01 (2011-07-15)
information.
# View detailed information about domain 1.
[SwitchC] display rrpp verbose domain 1
Domain Index : 1
Control VLAN : major 10
Protected VLAN : Reference Instance 1
Hello Timer : 2 sec(default is 1 sec)
RRPP Ring : 1
Ring Level : 0
Node Mode : Transit
Ring State : Linkup
Is Enabled : Enable
Primary port : XGigabitEthernet0/0/1
Secondary port: XGigabitEthernet0/0/2
# View detailed information about domain 2.
[SwitchC] display rrpp verbose domain 2
Domain Index : 2
Control VLAN : major 20
Protected VLAN : Reference Instance 2
Hello Timer : 3 sec(default is 1 sec)
RRPP Ring : 2
Ring Level : 0
Node Mode : Transit
Ring State : Linkup
Is Enabled : Enable
Primary port : XGigabitEthernet0/0/3
Secondary port: XGigabitEthernet0/0/4
Configuration file of Switch A
#
sysname SwitchA
#
vlan batch 20 to 21
#
rrpp enable
#
stp region-
configuration
instance 2 vlan 20 to
21
active region-configuration
#
rrpp domain 2
control-vlan 20
protected-vlan reference-instance 2
timer hello-timer 3 fail-timer 10
ring 2 node-mode master primary-port XGigabitEthernet 0/0/1 secondary-port
XGigabitEthernet 0/0/2 level 0
ring 2 enable
#
interface XGigabitEthernet0/0/1
port hybrid tagged vlan 20 to 21
stp disable
#
interface XGigabitEthernet0/0/2
port hybrid tagged vlan 20 to 21
stp disable
#
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
sub 11
Fail Timer : 7 sec(default is 6 sec)
Is Active : Yes
Port status: UP
Port status: UP
sub 21
Fail Timer : 10 sec(default is 6 sec)
Is Active : Yes
Port status: UP
Port status: UP
3 RRPP Configuration
94