Huawei Quidway S6700 series Configuration Manual page 259

Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability
Figure 6-3 Networking of a VRRP group in master/backup mode
10.1.1.100/24
Device
SwitchA
SwitchB
SwitchC
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
Issue 01 (2011-07-15)
Backup group 1
Virtual IP Address:
10.1.1.111
HostA
Ethernet
Interface
XGE 0/0/1
XGE 0/0/2
XGE 0/0/1
XGE 0/0/2
XGE 0/0/1
XGE 0/0/2
XGE 0/0/3
Configure VLANIF interfaces and assign IP addresses to the VLANIF interface.
Configure the OSPF protocol between Switch A, Switch B, and Switch C to implement
interworking between them.
Create VRRP group 1 on VLANIF 100 of Switch A. Set the highest priority for Switch A
in the VRRP group to ensure that Switch A functions as the master. Configure the
preemption mode on Switch A.
Create VRRP group 1 on VLANIF 100 of Switch B and use the default priority.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
SwitchA
Master
XGE0/0/1
XGE0/0/2
SwitchC
XGE0/0/1
XGE0/0/2
SwitchB
Backup
VLANIF interface
VLANIF100
VLANIF200
VLANIF100
VLANIF400
VLANIF300
VLANIF200
VLANIF400
6 VRRP and VRRP6 Configuration
XGE0/0/2
XGE0/0/1
HostB
XGE0/0/3
20.1.1.100/24
IP address
10.1.1.1/24
192.168.1.1/24
10.1.1.2/24
192.168.2.1/24
20.1.1.1/24
192.168.1.2/24
192.168.2.2/24
249