Huawei Quidway S6700 series Configuration Manual page 278

Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Configure IP addresses for the interfaces. The configuration procedure is not mentioned here.
Step 2 Configure OSPFv3 on Switch A, Switch B, and Switch C so that they can communicate with
each other. The configuration procedure is not mentioned here.
Step 3 Configure the hosts.
Set the default gateway address of Host A to 2000::10, which is the virtual IPv6 address of VRRP
group 1. Set the default gateway address of Host B to 2000::60, which is the virtual IPv6 address
of VRRP group 2. Set the default gateway address of Host C to 2003::2.
Step 4 Configure VRRP6 groups.
# Create VRRP group 1 and VRRP group 2 on VLANIF 100 of Switch A. Set the priority of
Switch A in VRRP group 1 to 120 so that Switch A becomes the master device in VRRP group
1. Use the default priority of Switch A in VRRP group 2 so that Switch A becomes the backup
device in VRRP group 2.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] interface vlanif100
[SwitchA-Vlanif100] vrrp6 vrid 1 virtual-ip FE80::1 link-local
[SwitchA-Vlanif100] vrrp6 vrid 1 virtual-ip 2000::100
[SwitchA-Vlanif100] vrrp6 vrid 1 priority 120
[SwitchA-Vlanif100] vrrp6 vrid 2 virtual-ip FE80::2 link-local
[SwitchA-Vlanif100] vrrp6 vrid 2 virtual-ip 2000::60
[SwitchA-Vlanif100] quit
# Create VRRP group 1 and VRRP group 2 on VLANIF 100 of Switch B. Use the priority of
Switch B in VRRP group 1 to 120 so that Switch B becomes the backup device in VRRP group
1. Set the priority of Switch B in VRRP group 2 to 120 so that Switch B becomes the master
device in VRRP group 2.
<Quidway> system-view
[Quidway] sysname SwitchB
[SwitchB] interface vlanif 100
[SwitchB-Vlanif100] vrrp6 vrid 1 virtual-ip FE80::1 link-local
[SwitchB-Vlanif100] vrrp6 vrid 1 virtual-ip 2000::100
[SwitchB-Vlanif100] vrrp6 vrid 2 virtual-ip FE80::2 link-local
[SwitchB-Vlanif100] vrrp6 vrid 2 virtual-ip 2000::60
Issue 01 (2011-07-15)
Create VRRP group 1 and VRRP group 2 on VLANIF 100 of Switch A. Ensure that Switch
A is the master device in VRRP group 1 and the backup device in VRRP group 2.
Create VRRP group 1 and VRRP group 2 on VLANIF 100 of Switch B. Ensure that Switch
B is the backup device in VRRP group 1 and the master device in VRRP group 1.
IPv6 addresses of the interfaces
IDs and virtual IPv6 addresses of the VRRP groups
Priorities of the switches in each VRRP group
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 VRRP and VRRP6 Configuration
268