Huawei Quidway S6700 series Configuration Manual page 153

Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability
The primary port is XGE 0/0/2, and the secondary port is XGE 0/0/1.
# View detailed information about UPE D in domain 3.
[UPED] display rrpp verbose domain 3
Domain Index
Control VLAN
Protected VLAN : Reference Instance 1 to 3
Hello Timer
RRPP Ring
Ring Level
Node Mode
Ring State
Is Enabled
Primary port
Secondary port : XGigabitEthernet0/0/4
The preceding information shows that VLAN 20 is the control VLAN in domain 3 and VLANs
mapping instance 1 to 3 are the protected VLANs.
UPE D is a transit node in domain 3 and is in LinkUp state.
The primary port is XGE 0/0/3, and the secondary port is XGE 0/0/4.
----End
Configuration Files
l
#
sysname UPEA
#
vlan batch 5 to 6 10 to 11 100 to 300
#
rrpp enable
#
stp region-configuration
instance 1 vlan 5 to 6 100 to 200
instance 2 vlan 10 to 11 201 to 300
active region-configuration
#
rrpp domain 1
control-vlan 5
protected-vlan reference-instance 1
ring 1 node-mode transit primary-port XGigabitEthernet 0/0/1 secondary-port
XGigabitEthernet 0/0/2 level 0
ring 1 enable
rrpp domain 2
control-vlan 10
protected-vlan reference-instance 2
ring 1 node-mode transit primary-port XGigabitEthernet 0/0/1 secondary-port
XGigabitEthernet 0/0/2 level 0
ring 1 enable
#
interface XGigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 5 to 6 10 to 11 100 to 300
stp disable
#
interface XGigabitEthernet0/0/2
port link-type trunk
port trunk allow-pass vlan 5 to 6 10 to 11 100 to 300
stp disable
#
return
Issue 01 (2011-07-15)
: 3
: major 20
: 1 sec(default is 1 sec)
: 1
: 0
: Transit
: LinkUp
: Enable
: XGigabitEthernet0/0/3
Configuration file of UPE A
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
sub 21
Fail Timer : 6 sec(default is 6 sec)
3 RRPP Configuration
Is Active: Yes
Port status: UP
Port status: UP
143