Huawei Quidway S6700 series Configuration Manual page 148

Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability
# Configure the VLANs mapping instance 2 as the protected VLANs in domain 2. Configure
VLAN 10 as the control VLAN.
[UPEC] rrpp domain 2
[UPEC-rrpp-domain-region2] protected-vlan reference-instance 2
[UPEC-rrpp-domain-region2] control-vlan 10
[UPEC-rrpp-domain-region2] quit
l Configure UPE D.
# Configure the VLANs mapping instance 1 as the protected VLANs in domain 1. Configure
VLAN 5 as the control VLAN.
[UPED] rrpp domain 1
[UPED-rrpp-domain-region1] protected-vlan reference-instance 1
[UPED-rrpp-domain-region1] control-vlan 5
[UPED-rrpp-domain-region1] quit
# Configure the VLANs mapping instance 2 as the protected VLANs in domain 2. Configure
VLAN 10 as the control VLAN.
[UPED] rrpp domain 2
[UPED-rrpp-domain-region2] protected-vlan reference-instance 2
[UPED-rrpp-domain-region2] control-vlan 10
[UPED-rrpp-domain-region2] quit
# Configure the VLANs mapping instances 1 to 3 as the protected VLANs in domain 3.
Configure VLAN 20 as the control VLAN.
[UPED] rrpp domain 3
[UPED-rrpp-domain-region3] protected-vlan reference-instance 1 2 3
[UPED-rrpp-domain-region3] control-vlan 20
[UPED-rrpp-domain-region3] quit
l Configure UPE E.
# Configure VLAN 20 as the control VLAN in domain 3.
[UPEE] rrpp domain 3
[UPEE-rrpp-domain-region3] protected-vlan reference-instance 1
[UPEE-rrpp-domain-region3] control-vlan 20
[UPEE-rrpp-domain-region3] quit
l Configure UPE F.
# Configure VLAN 20 as the control VLAN in domain 3.
[UPEF] rrpp domain 3
[UPEF-rrpp-domain-region3] protected-vlan reference-instance 1
[UPEF-rrpp-domain-region3] control-vlan 20
[UPEF-rrpp-domain-region3] quit
l Configure UPE G.
# Configure VLAN 20 as the control VLAN in domain 3.
[UPEG] rrpp domain 3
[UPEG-rrpp-domain-region3] protected-vlan reference-instance 1
[UPEG-rrpp-domain-region3] control-vlan 20
[UPEG-rrpp-domain-region3] quit
Step 4 Create RRPP rings.
l Configure UPE A.
# Configure UPE A as a transit node of ring 1 in domain 1 and specify primary and secondary
ports on UPE A.
[UPEA] rrpp domain 1
[UPEA-rrpp-domain-region1] ring 1 node-mode transit primary-port xgigabitethernet
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
138