Configuring Vrrp To Tracking The Bfd Session Status - Huawei Quidway S6700 series Configuration Manual

Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability
Procedure
l
l
----End
Example
Run the display vrrp command or the display vrrp6 command, and you can view the Track
IF field and the IF State field. The Track IF field indicates the type and number of the tracked
interface, and the IF State field indicates the interface status, which is either Up or Down.
<Quidway> display vrrp
Vlanif100 | Virtual Router 1
<Quidway> display vrrp6
Vlanif10 | Virtual Router 1

6.5 Configuring VRRP to Tracking the BFD Session Status

This section describes how to configure VRRP to track the BFD session status to implement fast
switchover.
Issue 01 (2011-07-15)
Run the display vrrp [ interface interface-type interface-number [ virtual-router-id ] ]
[ brief ] command to check the VRRP status.
Run the display vrrp6 [ interface interface-type interface-number [ vrid virtual-router-
id ] ] [ brief ] command to check the status and the configurations of a VRRP6 backup
group.
State : Master
Virtual IP : 10.1.1.111
Master IP : 10.1.1.1
PriorityRun : 130
PriorityConfig : 130
MasterPriority : 130
Preempt : YES
TimerRun : 1
TimerConfig : 1
Auth Type : NONE
Virtual Mac : 0000-5e00-0101
Check TTL : YES
Config type : normal-vrrp
Config track link-bfd down-number : 0
Track IF : XGigabitEthernet0/0/2
IF State : UP
State : Master
Virtual IP : FE80::1:2
Master IP : FE80::218:82FF:FED3:2AF1
PriorityRun : 200
PriorityConfig : 200
MasterPriority : 200
Preempt : YES
TimerRun : 100
TimerConfig : 100
Virtual Mac : 0000-5e00-0201
Uncheck hop limit : YES
Accept Mode : ON
Config type : normal-vrrp
Track If : XGigabitEthernet0/0/2
IF State : UP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Delay Time : 0
priority reduced
Delay Time : 0
priority reduced : 70
6 VRRP and VRRP6 Configuration
: 10
227