Huawei Quidway S6700 series Configuration Manual page 152

Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability
VLAN 1 is the control VLAN and VLANs mapping instance 1 are the protected VLANs.
UPE D is the master on ring 1; XGE 0/0/1 is the primary port; XGE 0/0/2 is the secondary port.
In domain 2:
VLAN 10 is the control VLAN and VLANs mapping instance 2 are the protected VLANs.
UPE D is the master node on ring 1. The primary port is XGE 0/0/2, and the secondary port is
XGE 0/0/1.
In domain 3:
VLAN 20 is the control VLAN and VLANs mapping instance 1 to 3 are the protected VLANs.
UPE D is a transit node on ring 1. The primary port is XGE 0/0/3, and the secondary port is
XGE 0/0/4.
l Run the display rrpp verbose domain command on UPE D. You can obtain the following
# View detailed information about UPE D in domain 1.
[UPED] display rrpp verbose domain 1
Domain Index
Control VLAN
Protected VLAN : Reference Instance 1
Hello Timer
RRPP Ring
Ring Level
Node Mode
Ring State
Is Enabled
Primary port
Secondary port : XGigabitEthernet0/0/2
The preceding information shows that VLAN 1 is the control VLAN in domain 1 and VLANs
mapping instance 1 are the protected VLANs.
UPE D is the master node in domain 1 and is in Complete state.
The primary port is XGE 0/0/1, and the secondary port is XGE 0/0/2.
# View detailed information about UPE D in domain 2.
[UPED] display rrpp verbose domain 2
Domain Index
Control VLAN
Protected VLAN : Reference Instance 2
Hello Timer
RRPP Ring
Ring Level
Node Mode
Ring State
Is Enabled
Primary port
Secondary port : XGigabitEthernet0/0/1
The preceding information shows that VLAN 10 is the control VLAN in domain 2, and VLANs
mapping instance 2 are the protected VLANs.
UPE D is the master node in domain 2 and is in Complete state.
Issue 01 (2011-07-15)
results:
: 1
: major 5
: 1 sec(default is 1 sec)
: 1
: 0
: Master
: Complete
: Enable
: XGigabitEthernet0/0/1
: 2
: major 10
: 1 sec(default is 1 sec)
: 1
: 0
: Master
: Complete
: Enable
: XGigabitEthernet0/0/2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
sub 6
Fail Timer : 6 sec(default is 6 sec)
sub 11
Fail Timer : 6 sec(default is 6 sec)
3 RRPP Configuration
Is Active: Yes
Port status: UP
Port status: BLOCKED
Is Active: Yes
Port status: UP
Port status: BLOCKED
142