Huawei Quidway S6700 series Configuration Manual page 87

Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability
l Run the display rrpp verbose domain command on SwitchA. Detailed information about
----End
Configuration Files
l
Issue 01 (2011-07-15)
Domain Index : 1
Control VLAN : major 20
Protected VLAN : Reference Instance 1
Hello Timer : 1 sec(default is 1 sec)
Ring Ring Node
ID Level Mode
Enabled
---------------------------------------------------------------------------
1 0 M
You can find that RRPP is enabled on SwitchA. The main control VLAN of domain 1 is
VLAN 20 and the sub control VLAN is VLAN 21. SwitchA is the master node of ring 1.
XGE 0/0/1 is the primary interface, and XGE 0/0/2 is the secondary interface.
RRPP domain 1 is displayed as follows:
[SwitchA] display rrpp verbose domain 1
Domain Index : 1
Control VLAN : major 20
Protected VLAN : Reference Instance 1
Hello Timer : 1 sec(default is 1 sec)
RRPP Ring : 1
Ring Level : 0
Node Mode : Master
Ring State : Complete
Is Enabled : Enable
Primary port : XGigabitEthernet0/0/1
Secondary port: XGigabitEthernet0/0/2
Configuration file of Switch A
sysname SwitchA
#
vlan batch 20 to 21 100 to 300
#
rrpp enable
#
stp region-
configuration
instance 1 vlan 20 to 21 100 to
300
active region-
configuration
#
rrpp domain 1
control-vlan 20
protected-vlan reference-instance 1
ring 1 node-mode master primary-port XGigabitEthernet 0/0/1 secondary-port
XGigabitEthernet 0/0/2 level 0
ring 1 enable
#
interface XGigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 20 to 21 100 to 300
stp disable
#
interface XGigabitEthernet0/0/2
port link-type trunk
port trunk allow-pass vlan 20 to 21 100 to 300
stp disable
#
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
sub 21
Fail Timer : 6 sec(default is 6 sec)
Primary/Common
Port
XGigabitEthernet0/0/1
sub 21
Fail Timer : 6 sec(default is 6 sec)
3 RRPP Configuration
Secondary/Edge
Port
XGigabitEthernet0/0/2
Is Active : Yes
Port status: UP
Port status: BLOCKED
Is
Yes
77